Dealing with a Unexpected Hot Water System Failure: Essential Steps
Dealing with a Unexpected Hot Water System Failure: Essential Steps
Blog Article
What are your beliefs about How to Troubleshoot and Repair an Electric Water Heater?
Many modern-day residences use an electrical water heater for their heating unit, due to its convenience and convenience of use. Nonetheless, much like any other electrical appliances, troubles might occur with its usage, all of a sudden. It can be truly aggravating to get up to a cold shower instead of a warm one or having your bathroom with water that isn't hot enough or perhaps as well hot. Whatever the situation may be, water heater troubles can be quite aggravating. Luckily, we've made a list of feasible options to your water heater issues. There are a variety of aspects that could create most of these troubles, it could be a concern with the power supply, the electrical burner, or the thermostat. Before doing anything, guarantee you switch off the major power supply for security. Whatever the problem is, getting it fixed must not pose excessive of a problem if you follow these actions:
Call An Expert:
If after replacing all damaged components and resetting your temperature level, the water heater still isn't functioning, you may require to contact a professional plumber for a professional point of view. The problem with your heater could be that the hot and cold taps have been switched or it might be undersized for the quantity of hot water needed in your home. Whatever the instance may be, a professional plumber would certainly aid resolve the trouble.
Check Your Power Supply:
As fundamental as this might seem, it is extremely essential. Without ample power, your water heater will not work. So the first thing to do when your water suddenly stops working is to verify that it isn't a power trouble. Check if the fuse is burnt out or the breaker tripped. If the circuit breaker is the concern, merely transform it on and off again. Replace any kind of broken or worn-out fuse. Check the home appliance with power after these adjustments to see if it's currently working.
Check Your Thermostat:
If your water heater still isn't working or the water appearing isn't warm enough, you may need to check the temperature level settings on your top thermostat. Ensure the circuit breaker is switched off prior to doing anything. Open up the access panel and press the red switch for temperature level reset above the thermostat. This need to assist heat the water. Turn the circuit breaker back on and inspect if the issue has actually been resolved.
Inspect the Heating Element in the Hot Water Heater:
If it's not a power trouble, after that try looking into your heating element if it is still working. Examine each of your heating elements to make sure the issue isn't with any one of them. If any one of them is faulty, replace that part and after that inspect whether the warm water is back on.
Conclusion
Water heater troubles are not constantly major. A number of them result from small concerns like a blown fuse or damaged burner. Replacing the defective components must suffice. However, if you are still not able to fix the issue, give a call to your nearby plumber ahead to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I discovered that entry about How to Troubleshoot and Repair an Electric Water Heater when browsing on the web. Please set aside a second to share this entry if you enjoyed reading it. We take joy in reading our article about Hot Water Heater Repair.
Real results? Dial! Report this page